oxide inclusion
英 [ˈɒksaɪd ɪnˈkluːʒn]
美 [ˈɑːksaɪd ɪnˈkluːʒn]
n. 氧化物夹杂
双语例句
- Oxide Inclusion in Cast Mg-Gd-Y-Zr Alloy
铸造Mg-Gd-Y-Zr合金氧化夹杂研究 - This paper analyzes the shape of oxide inclusion, sulfide inclusion in sponge Iron.
对固态还原生成的海绵铁中的硫化物、氧化物进行了显微分析。 - Effect of Oxide Inclusion on Hot-rolling Strip Tensile Properties
氧化物夹杂对热轧带钢拉伸性能的影响 - Electrolytic extraction-X-ray fluorescence spectrometric analysis of individual oxide inclusion in steel
电解提取-X射线荧光光谱法测定钢中氧化物夹杂分量 - The results show that the hot-top technology can wipe off the oxide inclusion efficiently, moreover, hot-top electromagnetic casting makes the technical process of electromagnetic casting more easily and simply.
结果表明：采用热顶电磁铸造法不仅可有效去除电磁铸造中因电磁搅拌产生的氧化夹杂，而且使得电磁铸造过程简便而易于控制。 - The results show that inclusion of oxide and sulfide, the central segregation of [ C] and and the looseness and tint crack caused by the inclusion are main reasons of inspection disqualification.
结果表明，检测不合的主要原因是组织中存在的氧化物、硫化物夹杂，C、Mn等元素的成分偏析以及由夹杂物造成的疏松和微裂纹。 - Because tailings grade of copper is still high to 0.40%, and the main copper in tailings is oxide copper ( by microscopic analysis), and the main dissemination characteristic is inclusion in gangues, so this case researched the treatment of tailings.
由于尾矿中铜品位尚有0.40%，经制片镜下检查表明，损失于尾矿中的铜主要是氧化铜，其存在形式主要以包裹体存在于脉石中，因此对该工艺流程的尾矿进行了再处理。 - A new heat extraction method for determining oxide inclusion in steel was developed.
开发了差热抽取测定钢中氧化物夹杂的新方法。 - It has turned out to be a powerful tool for deoxidation control and oxide inclusion control of steel.
应用实践说明，该热力学模拟方法可以用于钢包精炼中钢液的脱氧控制和钢中氧化夹杂物控制。 - Theory and Practice to Control of Composition and Morphology of Oxide Inclusion in Spring Steel
弹簧钢氧化物夹杂成分和形态控制理论与实践 - Also, sterling silver is alloyed with copper which is easy to be oxidized and to cause oxide inclusion.
斯特林银主要以铜作为合金化元素，容易氧化形成夹杂。 - The results show that the matrix composition of large-section prehardened-mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the control of composition aided by Thermo-calc software package minimizes the amount of detrimental oxide inclusion.
结果表明，大截面预硬型塑料模具钢的基体成分显著影响非金属夹杂物的析出，并且利用Thermo-calc计算软件控制成分可以显著降低有害氧化物夹杂的含量。 - Deoxidization and Oxide Inclusion Control of Steel
钢的脱氧与氧化物夹杂控制 - Besides, the contents of oxide inclusion are reduced by an average of 29%, to some extent the improvements on shape of nonmetallic inclusion and on mechanical property can be obtained. The economic benefit is notable.
同时，钢中氧化物夹杂含量平均减少29%，钢中非金属夹杂物形态有所改善，钢材的力学性能也有所提高，经济效益显著。 - In this paper the interaction between solute elements in Fe-Cu-Ce, Fe-P-Ce and Fe-Ti-Ce liquid solutions were determined at 1600 ℃ by solid oxide electrolyte, electrolysis of the inclusion in a non-aqueous medium at low temperature and plasma spectroscopy.
本文用固体电解质电池定氧、低温无水电解及等离子发射光谱等测试手段，研究了Fe-Cu-Ce，Fe-P-Ce，Fe-Ti-Ce溶液体系在1600℃平衡时溶质元素的相互作用规律。 - It is found that the ultrasonic imaging technology is an effective way to evaluate the quality of the ultrasonic brazed joint of aluminum matrix composites and detect the defects such as blow hole, oxide film inclusion and incomplete penetration in brazing interface.
超声成像技术能反映出铝基复合材料钎焊界面的接合状态，可检测出气孔、氧化膜夹杂和未钎透缺陷，为铝基复合材料钎焊的研究提供了有效的检测手段。 - The Distribution State of Silicon and Its Influence on the Determination of Oxide in Inclusion in Quenched 60Si_2 Mn Spring Steel
60Si2Mn弹簧钢中硅的存在状态及其对氧化物测定的影响 - A thermodynamic modeling is developed for slag-metal equilibration in LF, deoxidation control of the melt and prediction of composition of oxide inclusion in steel based on the sub-regular solution model of multi-component system.
本文基于多元系亚正规溶液模型建立了钢液脱氧控制的热力学模拟方法，并应用于钢包精炼中渣-金平衡、脱氧控制和钢中氧化物夹杂成分预测。 - The inclusions in magnesium alloys are oxide inclusion, flux inclusion, foreign inclusion et al throughout a number of trials, in which the majority is oxide inclusion.
试验研究表明，在镁合金中，主要存在有氧化物夹杂、熔剂夹杂和外来夹杂等几种夹杂物，其中最主要的夹杂物是氧化物夹杂。 - The causes of forming shrinkage defects and oxide inclusion defects frequently found in the production of Al-Si alloy castings have been analyzed, and the means of how to prevent them have been discussed also.
本文重点分析了在铝硅合金铸件生产中常见的收缩缺陷和氧化夹渣缺陷产生的原因，以及讨论了如何防止问题。 - The technique can avoid oxide inclusion to contaminate metal melts, high cost and secondary oxidation of solid oxide electrolyte deoxidation methods.
该方法避免了氧化物夹杂对金属液的污染以及固体电解质脱氧方法的高成本和二次氧化等问题。 - Oxide inclusion defects can be divided into: beehive-like slag-holes beneath the skin, inclusions in the surface layer, agglomerated inclusions in castings after machining, local penetrated porous inclusions etc.
氧化夹渣缺陷可分为皮下蜂窝状渣孔，整个断口上的夹渣，麦面氧化夹渣层，加工后铸件中成团簇的夹渣和局部穿透的疏松夹渣等缺陷。 - Inclusion content, especially large oxide inclusion is high in small converter because of nonstandard in slag stopping and argon bubbling stirring, short of floating time of inclusion, bad protecting of teeming system. The large foreign inclusions are bad to steel properties.
小转炉由于出钢挡渣、钢水吹氩搅拌不规范、钢中夹杂物上浮时间不足、浇钢系统保护不好，造成钢中夹杂物含量高，特别是大型氧化物夹杂数量多； - A primary investigation for the rapid determination of oxide inclusion in steel by differential heating method
差热法快速测定钢中氧化夹杂的初探 - Three-Dimensional Morphology of Ultrafine Oxide Inclusion in Steel Observed by Acid Dissolution Method
用酸溶法研究钢中超细氧化物夹杂的三维形貌 - Investigation of Quantitative Analysis Method on Oxide Inclusion in Steel
钢中氧化物夹杂定量方法探讨 - Effect of rare earth oxide on inclusion and microstructure in high-hardness surfacing
稀土氧化物对高硬度堆敷金属中夹杂物及组织的影响 - It can be found that this combination of process parameter can reduce the defects such as gas trapping, oxide inclusion, shrinkage cavity and porosity, and shorten the production cycle of casting.
通过对比可以发现此组参数充型平稳，可以减少裹气、氧化夹渣、缩孔缩松等铸造缺陷，并且充型和凝固时间都较为理想，缩短了生产周期。